Brocade Communications Systems ServerIron ADX 12.4.00 Manuel de service Page 42
- Page / 136
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
30 ServerIron ADX Advanced Server Load Balancing Guide
53-1002435-01
SIP SLB command reference
1
SIP SLB command reference
This section describes the syntax and usage for each SIP Server Load Balancing command in the
following modes:
• “Port sip (real server configuration mode)”
• “Port sip (virtual server configuration mode)”
Port sip (real server configuration mode)
Use the port sip command in the real server or virtual server configuration mode to configure a
proxy, redirect, registrar, or registrar-proxy server.
Syntax: port sip {sip-redirect-server | sip-proxy-server | sip-registrar |
sip-both-registrar-proxy-server} [health-check-method [options | register]] |
health-check-no-dsr]
• sip-redirect-server— Identifies the server as SIP redirect server.
• sip-proxy-server— Identifies the server as SIP proxy server.
• sip-registrar— Identifies the server as SIP registrar.
ServerIronADX4/2 # show sip debug packet-trace 172.28.8.67 172.28.8.100
4/2 #
->Start processing Incoming Flow [172.28.8.67:3798->172.28.8.100:5060] Data len
[1460]...
Start SIP Parsing for chain len [1460]...
SIP header parsing for flow COMPLETED with sip header - orig chain len [1460]
SIP packet header dump:
Packet type: INVITE
URI: sip:[email protected]:5060 version: SIP/2.0 response code: 0
parse completed: 1 num pkts processed: 1 method: INVITE
VIA header: SIP/2.0/TCP 172.28.8.67:5060;branch=z9hG4bKnashds8
Max forward: 70
Call ID: [email protected]
Cseq: 1 INVITE
Top branch id: z9hG4bKnashds8
Top Sent By: 172.28.8.67 Top Sent By Port: 5060
In sip_process_incoming_frontend_request...
…
Current transaction: branch [z9hG4bKnashds8] client[172.28.8.67]
Forwarding request from flow [172.28.8.67:3798->172.28.8.100:5060] to Server
[172.28.8.155:5060->172.28.8.67:3798]
- ServerIron ADX 1
- Document History 2
- Contents 5
- About This Document 9
- Command syntax conventions 10
- Notice to the reader 11
- Related publications 11
- Web access 12
- E-mail and telephone access 12
- SIP Server Load Balancing 13
- SIP terminology 16
- SIP message headers 17
- Max-Forwards 18
- Sample deployment topologies 19
- RINGING F4 21
- Configuring SIP SLB 23
- Configuring health check 26
- Example 29
- Load Balancing SIP over TCP 31
- Call-ID3 33
- Call-ID1 34
- Rehashing the SIP hash table 38
- Debug commands 40
- SIP SLB command reference 42
- Sample configuration 43
- Transparent Cache Switching 45
- Stateful caching 47
- Sample Deployment Topologies 48
- TCS with spoofing 49
- TCS with destination NAT 49
- TCS with Source NAT 50
- VIPs with reverse proxy 51
- Configuring TCS 52
- Defining a cache server 53
- Enabling TCS 56
- Other TCS options 57
- Cache Route Optimization 58
- Enabling Destination NAT 62
- Configuring Source NAT 62
- Examples 64
- Distribution algorithm 66
- • Maximum connection rate 72
- Enabling FastCache 73
- Enabling remote cache 73
- Shutting down a cache server 74
- Passive FTP for TCS 75
- Traffic flow of passive FTP 76
- Topologies supported 76
- High availability support 77
- ServerIron ADX 2 78
- Policy based caching 79
- Show commands 81
- Content aware cache switching 82
- Setting up the CSW policies 84
- Configuring the cache servers 85
- This field... Displays 91
- Displaying cache information 95
- TCS information (Continued) 96
- Sample configurations 98
- Applying IP policies 99
- Defining the caches 99
- Defining the cache groups 100
- 53-1002435-01 101
- Policy-based caching 102
- Asymmetric TCS (FastCache) 103
- Policy-based cache failover 105
- TCS with reverse proxy 107
- Layer 3 TCS 109
- Basic TCS configuration 110
- Commands for ServerIron ADX A 111
- Commands for ServerIron ADX B 112
- Internet 114
- 10.10.20.104 114
- 10.10.20.102 114
- Router NI1 117
- Router NI2 117
- OSPF Area 0 117
- Commands for Router NI2 121
- Active-standby TCS 125
- Configuring Router R1 126
- Configuring ServerIron ADX A 126
- Configuring ServerIron ADX B 127
- NetCache servers 128
- NetCache C720 cache server 128
- TABLE 9 Hashing methods 130
- Parsing the host string 133
- Force rehash 136
Produits connexes et manuels pour Commutateurs de réseau Brocade Communications Systems ServerIron ADX 12.4.00
Commutateurs de réseau Brocade Communications Systems NetIron CER Series Manuel d'utilisateur
(42 pages)
(42 pages)
Commutateurs de réseau Brocade Communications Systems Brocade Superx Series Manuel d'utilisateur
(14 pages)
(14 pages)
Commutateurs de réseau Brocade Communications Systems Brocade VDX 6710-54 Manuel d'utilisateur
(8 pages)
(8 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.262 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels