Brocade Communications Systems ServerIron ADX 12.4.00 Manuel de service télécharger pdf (Page 41)

ServerIron ADX Advanced Server Load Balancing Guide 29

53-1002435-01

Configuring SIP SLB

Debug SIP TCP connection

Syntax: show sip debug tcp-connection

Debug UDP process

Syntax: show sip debug udp-process

Debug SIP packet trace

The show sip debug packet-trace command shows the packets whose IP address is either of

<src-or-dest-IP-1> or <src-or-dest-IP-2>. The output prints out packet processing starting from

parsing to forwarding. It is very useful in debugging; however, it only prints in the BP console not on

rconsole.

Syntax: show sip debug packet-trace <src-or-dest-IP-1> <src-or-dest-IP-2>

The following example is a display of "INVITE" packet processing shown on a BP console.

ServerIronADX# show sip debug tcp-connection

SIP Connection Counters:

TCP CONNECT ERR :130 TCP CONNECT HOST ERR :0

TCP CONNECT ALLOC FAILED :0 TCP CONN BUSY :0

TCP CONN RPORT FAILED :5 TCP DYNAMIC BACKEND LISTEN :0

TCP DYNAMIC FRONTEND LISTEN :0 TCP CONN PKT CHAIN ERR :0

TCP CONN DBL FREE :0 TCP MAX CONN REACHED :0

TCP SESSION ERR :0

SERVERIRON 1/1#

ServerIronADX# show sip debug udp-process

SIP UDP Process Counters:

UDP ERR :0 UDP NO HEADER :0

UDP UNKNOWN PKT :0 UDP PKT TO MP :0

UDP FWD DROP :55 UDP REV DROP :2

UDP NO ACTION :0

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 135 136

Pas de commentaire

Brocade Communications Systems ServerIron ADX 12.4.00 Manuel de service Page 41