Brocade Communications Systems Gateway Manuel de service télécharger pdf (Page 56)

D-8 Access Gateway Administrator’s Guide

Publication Number: 53-1000430-01

AG-1010

If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the

supportSave command and contact your switch service provider.

Severity WA RN I NG

AG-1010

Message

Probable

Cause

Indicates an internal problem with the Secure Fabric OS.

Recommended

Action

Verify the configuration of the fabric switch..

If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the

supportSave command and contact your switch service provider.

Severity WA RN I NG

AG-1011

Message

Probable

Cause

Indicates that the discover F_Port service parameters (FDISC) request sent to the fabric switch from the

Access Gateway failed.

Recommended

Action

Verify the configuration of the fabric switch..

If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the

supportSave command and contact your switch service provider.

Severity WA RN I NG

AG-1012

Message

Probable

Cause

Indicates that the N_Port logout request sent to the fabric switch from the Access Gateway failed.

<timestamp>, [AG-1010], <sequence-number>,, WARNING, <system-name>,

PLOGI sent from N-Port <port> failed

<timestamp>, [AG-1011], <sequence-number>,, WARNING, <system-name>,

FDISC sent from N-Port <port> failed

<timestamp>, [AG-1012], <sequence-number>,, WARNING, <system-name>,

FDISC sent from N-Port <port> failed

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 62

Pas de commentaire

Brocade Communications Systems Gateway Manuel de service Page 56